| UTM |
 |
Capacity
(Product) |
20ton |
| Test type |
Extension, Compression, Bending, Shear |
| Remark |
Data Recording of Load, Deformation, Spring Constant,
etc |
| Application |
Composite Part Property Test |
|
| |
| Hydro Pressure / Repeating Test |
 |
Capacity
(Product) |
2,000 Bar |
| Test type |
Hydro Pressure Test |
| Remark |
Variable pressure test, busting, etc |
| Application |
Composite material behavior analysis in the high pressure
condition like the pressure vessel |
|
| |
| High Pressure Gas Leak Tester |
 |
Capacity
(Product) |
100MPa |
| Test type |
Auto/Manual Mode |
| Application |
Composite Pressure Vessel Helium Filling |
|
| |
| Helium Leak Detector |
 |
Capacity
(Product) |
Heilum Pumping Speed : 1.8L/s
Max. Vacuum Degree : 1X10-3 Torr
- Max. Helium Leak Detection : 5X10-12 atm.cc/s
|
| Test type |
Vacuum Leak Test
Atmospheric Pressure Leak Test(Sniffer Type) |
| Application |
Composite Pressure Vessel Leak Test |
|
| |
| (Coil-Spring Durability Test M/C) |
 |
Cycle/sec |
1Hz
|
| Max. Torque |
56.5kgf.m
|
| Max. Disp. |
150mm(The displacement can be changed by replacing the cam.) |
| Size |
700W * 1000L * 1560H |
|
| |
| ROMER ABSOLUTE ARM |
 |
Capacity
(Product) |
Single point repeatability : 0.016 mm / 0.0006 in
Volumetric accuracy : 짹 0.023 mm / 0.0009 in
Arm weight : 7.7 kg / 17.0 lbs
Arm range : 2.0m
|
| Test type |
3D Probing measurement
|
| �슜�룄 |
3D measurement of composite materials and molds |
|
| |
| 3D LASER SCANNER |
 |
Capacity
(Product) |
Accuracy : 40 關m 2 sigma
Point acquisition rate : 45 000 points per second
Points per line : 750
Line rate : 60 Hz
Line width (mid-field) : 80 mm
Stand-off distance : 135 mm +/- 45 mm
Minimum point spacing : 0.08 mm
Laser power adjustment : Semi-automatic
|
| Test type |
3D Laser Scanning
|
| �슜�룄 |
3D geometry scan of composites and molds |
|
